holden.wiki

• MODEL SELECTION INDEX
• RA RODEO
• SECTION 11 - IMMOBILISER SYSTEM
  • Service Precaution
  • General Description
    • What Happens Without Correct Transponder Key Operation?
    • No Correct Transponder Is Available, What Should Be Done For The System?
    • Without The Security Code The Transponder Key Cannot Be Programmed
    • Caution
    • Summary Of Operation
  • Circuit Diagram
  • Parts Location
  • Immobiliser Control Unit (ICU)
    • Pin-Outs
  • Immobiliser Coil (Antenna)
  • Transponder (Key)
  • Check Engine Lamp
  • Engine Control Module (ECM)
  • Important Information on Programming
    • Security Code
    • Entering The Security Code
    • Transponder (Key)
    • Important
  • Tech 2 Scan Tool
    • TECH 2 Features
    • Getting Started
    • Operating Procedure
    • Menu
    • DTC
    • Clear DTC Information
    • TECH2 Data Display
    • Check Vehicle Identification Number (VIN)
    • Reset Immobiliser (Reset Immobiliser Control Unit)
    • Reset Engine Control Module (Reset ECM)
    • Erase Transponder Key
    • Programming Immobiliser Function
    • Programming ICU
    • Programming ECM
    • Programming ICU And ECM
    • Transponder Program
    • Data List
  • Diagnostic Procedure
  • Clearing Diagnostic Trouble Codes
  • Verifying Vehicle Repair
  • Diagnostic Aids
    • Check The Condition For System Parts.
    • Check The Electro-Magnetic Interference (EMI)
    • Check The Other Items.
    • Check The Operation
  • Diagnostic Trouble Code (DTC) List
  • Immobiliser System Check
  • No Check Engine Lamp
  • Check Engine Lamp On Steady
  • B8001 Replace Electronic Control Unit (ECU) (Immobiliser Fault)
  • B8002 Immobiliser Not Programmed
  • B8003 Transponder Key Problem
  • B8004 Immobiliser Coil Circuit (Antenna Coil Fault)
  • B8005 Communication Line W Voltage Low
  • B8006 Communication Line W Voltage High
  • B8007 No Engine Request Received
  • B8008 Wrong Transponder Key
  • B8009 No Transponder Key Programmed
  • B8010 Unknown Transponder Key
  • Special Tools